Operating from –40 up to +175°C, the PHT220 series is dedicated to high temperature pressure measurements. With all stainless steel wetted parts, it is compatible with most...
The PTA220 series is designed for absolute or gage pressure measurements from 50mbar up to 600bar. With all stainless steel wetted parts, it is compatible with most fluids use...
The 10bar submersible S114 is an affordable, durable, water resistant, high-accuracy position sensor. Derived from the S114 Submersible Linear Position Sensor
The 10bar submersible S114 is an affordable, durable, water resistant, high-accuracy position sensor. Derived from the P101 linear sensor, the…
The 350bar S623 tilt sensor is an affordable, durable, high-accuracy sensor designed for underwater marine and offshore applications. The S623, like all Positek® sensors, is ...
Body clamp for Penny & Giles SLS130 Linear Displacement Sensor. Kit comes with two clamps.
The SLS130 linear sensor is designed to provide maximum performance benefits ...
Spring loaded shaft kit for Penny & Giles SLS130 Linear Displacement Sensor stroke lengths 25 to 150mm with /L (Long) shaft option and /50 (IP50 sealing) options only.
...
Flange mounting for Penny & Giles SLS130 Linear Displacement Sensor.
The kit has 3 holes 3.2 diameter equi-spaced on 28.05 / 27.95 PCD.
A wide choice of mounting opt...
The Penny & Giles SA200337 quick release ball joint (Heim) mounting kits for Penny & Giles SLS130 and MLS130 Linear Sensors.
The SLS130 linear sensor is designed to...
Protective sleeves for all Penny & Giles SLS190 Linear Displacement Sensor stroke lengths with self aligning bearings only.
In addition to the IP66 protection of Penny ...
Protective sleeves for all Penny & Giles SLS320 Linear Displacement Sensor stroke lengths with self aligning bearings only.
In addition to the IP66 p...
Body Clamp for Penny & Giles SLS190 Linear Displacement Sensor. Kit comes with two clamps.
The SLS190 sensor is a range of linear displacement sensors designed to provi...
Flange mounting kit for Penny & Giles SLS190 Linear Displacement Sensor.
The mounting kits has 3 holes 4.2 diameter equi-spaced on 43.05 / 42.95 PCD.
A wide choice o...
Body clamp mounting kits for Penny & Giles SLS320 Linear Displacement Sensor. Kit comes with two clamps.
Mounting recommendation for all units between 1150 to 1600 mm s...
Seika SB1S Sensor box containing one sensor, one signal conditioner with 0...5V output and two open-collector output switches.
The SB1S is a pressure die cast aluminium sen...
Seika SB360 Sensor box containing one NG360 inclinometer with RS485 interface.
The SB360 is a pressure die cast aluminium sensor housing (IP65) with an integrated NG360 inc...
Seika SBG2U Sensor box containing two NG inclinometers and two signal conditioners with 0...5V outputs and extensive temperature drift compensation. Former Denotation: SB2G
...
Seika SBG3I Sensor box containing three SEIKA sensors and three signal conditioners with 4...20mA output.
The SBG3I is a pressure die cast aluminium sensor housing (IP65) w...
Seika SBL1 Sensor box for use in particularly harsh operating conditions containing one sensor and one signal conditioner with 4...20mA, 2-wire output.
The SBL1 is a large,...
Seika SBL1S Sensor box for use in particularly harsh operating conditions containing two sensors, one signal conditioner with 4...20mA output, one signal conditioner with 0......
Seika SBS1U Sensor box containing one highly sensitive servo inclinometer and one signal conditioner with ±5V output.
The SBS1U is a pressure die cast aluminium sensor hou...
A dual-redundant output, contactless, rotary position sensor with integrated 6-way connectors, using a factory programmable Hall-effect sensor system. Contactless - Hall-effect technology…
Lumel ULS10 Ultrasonic Level Sensor is designed to measure distance/level based on ultrasonic technology. Measuring range, depends on if the execution is equal to 10 or 15m.
...
Lumel ULT20 is designed to measure distance/level and after programming functions which process the measured value of distance it can be used to measure the filling of tanks t...
The X005 has an input power supply range of 12 to 30 volts dc, making it suitable for a wide range of hazardous area applications. It is tri-port isolated providing isolation ...
The intrinsically safe X100 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for demanding hydraulic or pneumatic cylinder po...
The intrinsically safe X101 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for industrial and scientific feedback applicati...
The intrinsically safe X103 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for a wide range of industrial applications and ...
The intrinsically safe X106 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for demanding hydraulic or pneumatic cylinder po...
The intrinsically safe X111 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. This heavy-duty version of the X111 Linear Position Sensor
The intrinsically safe X111 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. This heavy-duty version of…
The intrinsically safe X112 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for gauge head positioning in industrial and sci...
The intrinsically safe 10bar X114 is an ATEX and IECEx approved affordable, durable, high-accuracy position sensor.
The X114, like all Positek® sensors, provides a linear ...
The intrinsically safe X117 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for industrial and scientific feedback applicati...
The intrinsically safe X118 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. The X118 is designed for a wide range of industrial application...
The 350bar X120 is an ATEX and IECEx approved version of the S120 cylinder sensor. The X120 is sealed for a maximum of 350bar combined hydraulic and water pressure. The unit i...
The intrinsically safe X125 sealed to IP68 350bar (5000psi, 3500m), is an ATEX and IECEx gas approved linear sensor. With a strong 12.6mm push rod it is recommended for applic...
The intrinsically safe X133 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for a wide range of industrial applications and ...
The intrinsically safe X138 is ATEX and IECEx approved linear sensor for use in potentially explosive gas/vapour atmospheres.
The X138 is designed for a wide range of indus...
The intrinsically safe X500 rotary sensor is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for industrial and scientific feed...
The intrinsically safe X502 rotary sensor is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for industrial and scientific feed...
