Maximum ammeters - BA and BE series are designed to measure the averaging RMS value of a a.c. current, in a 8 or 15 minutes' period.
An additional red pointer, displaced by...
Frequency meters CA39D and CA32D types are designed to measure voltage frequency in a.c. electrical power networks. Two instruments in one case can be used to save both panel ...
Moving-iron meters EA-16, EA17, EA-19, EA12 types are designed to measure a.c. voltage or a.c. current. They measure the true RMS value of a.c. voltage or a.c. current.
&nb...
EA19D meter is designed for the measurement of AC currents for frequency range of 15 ... 400Hz and voltages in the frequency range of 15 ... 100Hz.
Meter has two different ...
Voltmeters equipped with a change-over switch EP27 and EP29 type are destined to measure phase-to-phase and line-to-line voltages in low voltage power networks.
A switch in...
Ditel Junior-E (JR-E) and Junior20-E (JR20-E) Digital Panel Meter is designed for the following input signals: DC Voltage (±600V, ±200V and ±20V), DC Current (±5A, ±1A, Â...
LLM3 Live line monitor is used to indicate the presence of voltage in the three-phase power supply.
Each of the monitored phases is indicated by a LED display with an appro...
Lumel M266C Clamp meter is one of the handheld series 3½ digital clamp meter for measuring DC and AC voltage, AC current, resistance, continuity test and temperature test.
...
Moving-coil meters with built-in rectifiers MA16L(P), MA17L(P), MA19L(P), MA12L(P) are designed to measure a.c. voltage or a.c. current converted into a current or voltage sta...
Moving-coil meters with built-in rectifiers MA16L(P), MA17L(P), MA19L(P), MA12L(P) are designed to measure a.c. voltage or a.c. current converted into…
Ditel Micra-X Digital Panel Meter is designed for operating as an industrial visualiser or repeater controlled through RS485 network and MODBUS RTU and ASCII communications pr...
Mounting device on DIN rail, table, wall or vertical grid.
Kit contains:
A. Two special attachment clips.
B. 4 screws for fastening clips to the inside of the branches ...
Lumel N14 3-phase Power Network Meter is programmable digital panel instrument designed for the measurement of 3 or 4-wire power network parameters, in balanced or unbalanced ...
The N20 meter is a digital programmable panel instrument designed for measurements of DC Voltages, DC currents or temperature. The readout display is a LED display which enabl...
The N20HPLUS meter is a digital programmable panel instrument destined for measurements of DC voltages up to 400V. The readout display is a LED display which enables the expos...
The N20PLUS meter is a digital programmable panel instrument designed for measurements of DC voltages, DC currents or temperature. The readout display is a LED display which e...
The N20Z meter is a digital programmable panel instrument designed for measurements of AC voltages, AC currents or frequencies. The readout display is a LED display which enab...
The N20ZPLUS digital panel meter is a digital programmable panel instrument designed for measurements of AC voltages, AC currents or frequency. The readout display is a LED di...
N21 Digital meter is an ideal solution for visualisation of industrial processes. Universal input universal supply and universal OLED display allow to apply meter in many appl...
Lumel N24 Programmable Digital Panel Meter series are designed for measurement of DC voltage or DC current, temperature from Pt100 sensors and J, K thermocouples, AC voltage a...
Designed for measurement of RMS current and voltage (AC), active power and frequency. Thanks to modern design, N27D fulfils the requirements for devices mounted in standard mo...
Designed for direct or indirect measurement of 1-phase network parameters: U, I, f, P, Q, S, PF, tg, fi, fi, Ep, Eq. Thanks to modern design, N27P fulfils the requirements for...
The N30O meter is designed for the measurement of pulses, frequency, rotational speed, period and worktime. The meter has 2 counter inputs to co-operate with an encoder. The m...
N30P meter is designed to measure: AC voltage, AC current, active, reactive and apparent power, cos φ, tg φ, φ, frequency, active, reactive and apparent energy, 15 min. act...
Lumel N31U Digital Panel meter is a new programmable meter designed for the measurement of standard analog signals used in automation. It is equipped with a modern high-contra...
Lumel N32H Digital panel meter for DC Circuit Parameters. The N32H digital panel meter combines versatility, modern design and reliability. This solution is designed for the m...
Lumel N32O is a programmable digital panel meter of pulses, frequency, rotational speed.
The N32O digital panel meter combines versatility, modern design and reliability....
Lumel N32P Digital Panel Meter is a programmable meter for 1-phase power network parameters. It combines versatility, modern design and reliability. This solution is designed ...
The Lumel N32U Programmable Digital Panel Meter designed for temperature, resistance and standard signals.
The N32U meter combines versatility, modern design and reliabilit...
The Lumel N32U Programmable Digital Panel Meter designed for temperature, resistance and standard signals. The N32U meter combines versatility, modern…
N43 Rail mounted 3-phase power network meter
Designed for direct (up to 63A) and indirect measurements in 3-phase 4-wire/3-wire balanced and unbalanced systems.
NC11 clamp-on meter has been designed to measure AC current and voltage, DC voltage as well as capacitance, circuit continuity, resistance, frequency, duty cycle and temperatu...
Lumel NC12 clamp-on meter has been designed to measure AC/DC currents and voltages, as well as a capacitance, circuit continuity, resistance, frequency, duty cycle and tempera...
ND25 Power network meter measures important electrical parameters in 3-phase 4-wire, 3-phase 3-wire and 1-phase 2-wire network. It measures electrical parameters like active /...
ND25 Power network meter measures important electrical parameters in 3-phase 4-wire, 3-phase 3-wire and 1-phase 2-wire network. It measures electrical…
Lumel ND30IoT Power network meter with Ethernet and recording dedicated to IoT applications. Measurement of 54 parameters, harmonics up to 51st, MQTT protocol dedicated to IoT...
Lumel ND31LITE Power network meter with MODBUS RTU (RS485) protocol.
The ND31LITE network parameter meter, has been designed specifically for applications requiring high-qu...
Lumel ND45 PLUS Power Network Analyser measures and records over 500 electric energy quality parameters, class A for selected parameters, harmonics and interharmonics up to 51...
Lumel NMID30-1 V1 Energy Meter is a new generation modern design power network analyser that will monitor, measure and display electrical power quality parameters. It has been...
NMID30-2 is a new generation modern design power network analyser monitor that will measure and display electrical power quality parameters. It has been engineered to cover mo...
Digital multimeter NP06 type is widely used in the electrical electronics industry service works and as a training - learning tool. The multimeter allows for measurement of AC...
True RMS digital multimeter NP15B is a complete tool for testing and measuring equipped with over 30 different functions. It is characterised by a high level of safety, high m...
Insulation meter NT10 features a large backlit LED display and its compact and robust design makes NT10 meter a reliable and easy-to-use instrument.
The product is designed...
Ditel Pica 101-P and Pica 101-P6 Digital Panel Meters are 8 x 24mm (1/32 DIN) sized and fully programmable. It is easy to scale into the required engineering units directly th...
The RS4 option allows the connection of up to 31 KOSMOS instruments to a master device via the RS485 interface.
The option is supplied with the following accessories:
Lumel VA312 Digital Clamp Meter is an autorange professional clamp meter for measuring DC and AC voltage, AC current, resistance, Capacitance, Frequency, Diode, and continuity...
