Lumel M266C Clamp meter is one of the handheld series 3½ digital clamp meter for measuring DC and AC voltage, AC current, resistance, continuity test and temperature test.
...
Lumel Marc Energy Software is a cloud based next generation energy data analytics platform for demand side management of energy loads and process parameter monitoring.
&nbs...
Lumel N31U Digital Panel meter is a new programmable meter designed for the measurement of standard analog signals used in automation. It is equipped with a modern high-contra...
Lumel ND45 PLUS Power Network Analyser measures and records over 500 electric energy quality parameters, class A for selected parameters, harmonics and interharmonics up to 51...
Lumel NEO Photovoltaic String Inverters conforms to the most advanced international standards, the PVSA satisfies the application demands of a market in constant technological...
The Lumel NF20 power factor controller is designed for reactive power compensation. It controls external reactive power element (capacitor) to meet reactive power demand of th...
Lumel NR32 Multifunctional Meter is a modern power network meter designed to monitor basic electrical parameters and analyse current and voltage harmonics up to 31st. It is de...
The Lumel NS5 Synchronisation Meter has been designed for automatic switching of three-phase generators for parallel operation with the grid of with other generators with a fr...
The Lumel P10Z AC Transducer transforms the RMS value of AC current and voltage into standard DC signal input, output and supply of the transducer are are galvanically isolate...
The Lumel P15 DC Transducer/Separator (Splitter) ensures galvanic isolation between input. Two outputs and the supply circuit. The transducer meets all the requirements concer...
The Lumel P17 Transducer of temperature and standard signals is designed to convert the signal from temperature, resistance or voltage sensors into a 4...20 mA current signal....
The Lumel P17G Passive separator in a housing of 6.2 mm width, serves for the electric isolation and filtration of the 0 (4)...20 mA standard signal value without an additiona...
The Lumel P20 Programmable transducer is designed to convert the temperature, resistance, voltage from shunt and standard signals into a standard constant-current or constant-...
The Lumel P20H Transducer of d.c. voltage or current are applied for the continuous conversion of d.c. voltage and d.c. current into a standard d.c. current, d.c. voltage sign...
The Lumel P30H Transducer of D.C. Circuit parameters with Ethernet. is a transducer which is designed for photovoltaic, battery, telecommunications and railway installations. ...
The Lumel P30O Transducer of pulses, frequency, turns, operation time with Ethernet. This is a programmable transducer that is designed to convert the number of pulses, number...
The Lumel P30U transducer is designed to convert temperature, resistance, standard voltage and current signals into a standard DC voltage or DC current signal. The output sign...
The P41 1-phase programmable transducer of power network parameters is designed for conversion into analog or digital signals 1-phase network parameters.
Lumel PD20 USB/RS485 Interface industrial converter.
The PD20 converter does not interfere into the structure of data transmission and is compatible with many industrial co...
Lumel PD24 converter is designed for the conversion of USB interface into RS232 (TTL) interface with TTL voltage levels. Additionally it is the programmer for LUMEL products t...
The Lumel PD52 Converter/Repeater RS285/RS232 interface is a digital device designed to convert the RS232 into an RS485 interface or the RS485 interface into an RS485 interfac...
Lumel PD9 converter module is used to detect transparent data transmission between Ethernet interface and the serial port and the protocol converter. The serial port is the RS...
The RE01 controller is designed to have temperature control in food industry, heating and cooling industry and everywhere when the stabilisation of temperature changes is nece...
Lumel RE12S Universal PID Controller is an advanced and versatile device designed for precise process control in various industrial applications. With adaptive, auto and self-...
The RE4x series process controllers are distinguished by the innovative PID & Fuzzy Logic algorithm. This allows the set point to be reached in the shortest time with a mi...
The RE62 Temperature Controller is designed to control the temperature and other physical quantities (pressure, humidity, level, etc.) in plastics, food, dehydration industrie...
The RL10 Temperature limiter has been designed to use in all applications when there is a need to monitor heating processes and the system is to be switched into a safe mode i...
The Lumel RP3 Power Controller is a contactless three-phase power energy electronic device which includes a thyristor connector and an electronic gate triggering system (GTS)....
The Lumel RP7 Power Controller allows to control the delivered power from an a.c. voltage source to a resistance or resistance-inductive receiver of electrical energy and the ...
The Lumel S4AI Module has 4 analog inputs dedicated to convert standard signals (current, voltage, temperature, resistance) into digital RS485 signal with Modbus protocol.
...
The Lumel S4AO modules comes with 4 analog outputs dedicated to convert digital data sent by mens of the MODBUS protocol to standard DC (Voltage or current) signals.
The Lumel SM1 - 2 channel Analog input module is designed to convert standard signals, resistance or temperature signals into numerical data accessible through the RS485 or RS...
The Lumel SM2 Analog input module has 4-channels and is designed to convert standard signals, resistance or temperature signals into numerical data accessible through the RS48...
The Lumel SM3 Logic or Pulse input modules come with 2-channels and is designed to collect logic states or to count pulses coming from the inputs and make them available to co...
The Lumel SM4 Logic Output Modules is designed to control simple executing devices through the assigned logical states, received from the master device through the assigned lo...
The Lumel SM5 Logic input module comes with 8-channels and is designed to collect logic states of inputs and make them available to computerised systems working on the base of...
Lumel Pedestrian or vehicle inspection for gamma neutron radiation. The SMP Stationary Radiation Monitor System that detects gamma-neutron radiations is designed to work in an...
Lumel Pedestrian or vehicle inspection for gamma neutron radiation. The SMP Stationary Radiation Monitor System that detects gamma-neutron radiations is…
The Lumel SPC5 Reverse Power Controllers monitor the output power of PVSA inverters and prevents excess power being produced from being exported to the utility grid. This is p...
The Lumel T22CT AC Transducer is a very reliable, efficient and robust transducer for measurement of AC current. It provides 4 to 20 mA or 0 to 20 mA DC output. It can be used...
The Lumel Hallotron T23CT transducer is designed for continuous conversion of DC and AC RMS into a standard DC 4-20mA signal. The transducer is designed to be mounted directly...
Lumel VA28B Auto Scan, Auto range Digital Multimeter is a mini-sized multimeter that has multi functions such as auto range and auto scan (SMART) and true RMS functions, which...
Lumel VA312 Digital Clamp Meter is an autorange professional clamp meter for measuring DC and AC voltage, AC current, resistance, Capacitance, Frequency, Diode, and continuity...
Lumel VA333 Digital small size clamp-on meter can measure AC/DC Current (Clampsense), AC/DC Voltage, resistance, Capacitance, Continuity, Diodes, Frequency, Duty Cycle and so ...
Lumel VA333 Digital small size clamp-on meter can measure AC/DC Current (Clampsense), AC/DC Voltage, resistance, Capacitance, Continuity, Diodes, Frequency, Duty…
