• Contact resistance: 10 M Ω
• Recommended load:
Silver- 0.5 - 50 mA 24 VDC
Gold - 0.5μ - 50 mA 24 VDC
• Contact bounce: <2 mS - typically 0.5 mS
Multimec 5E
NOTE: This item is not available for distribution in NZ, please contact us for other products that are available.
Multimec 5E switch has a small diameter snap-on cap retention system and an actuator extended out of the switch body. 5E is only available in high temperature material in order to stand today’s advanced soldering processes.
Caps available for Multimec 5E switches are: 1SS, 1PS and 1YS.
The switches have a dimension of 10 x 10 mm and a height of 6.4 mm. The switch has a momentary NO or NC/NO switch function. It has an IP67 sealing. It van operate 10,000,000 cycles
The switches has a surface mounting (SMD), Through hole (TH) or through-hole RAS mounting.
• Standard actuation force (switch):
NO - 2.0 N, 3.5 N, 6.5 N
Quiet - 2.0 N
NC/NO - 3.5 N
• Max. Actuation force without cap:
NO - 115 N for 60 sec (according to MIL-PRF-22885H)
NC/NO - 100 N for 10 sec
• Key travel (switch): 1 mm
• Lifetime:
NO - >10,000,000 cycles
NC/NO - >1,000,000 cycles
• Through-hole (TH) or surface mount (SMD) or right angel through-hole
• 50 mA / 24 VDC
• Single pole/momentary
• 10,000,000 operations lifetime (NO function)
• Temperature range: -40/+160 °C
• IP67 sealing
• Actuation force: 2.0 N, 3.5 N, 6.5 N
NO or NC/NO
ENVIRONMENTAL SPECIFICATIONS
• Working temperature: -40/+160 °C
• Storage temperature: -40/+160 °C
• Soldering (TH): IEC 68-2-20 8
• Soldering (SMD): JEDEC J-STD-020C
• ENVIRONMETAL ENDURANCE IEC 68-2-3
• Temperature: +40 °C
• Humidity: 93% RH
• Duration: 56 Days
• TEMPERATURE CYCLING IEC 68-2-14
• Temperature limit: -55/+85 °C
• Number of cycles: 200
• Exposure time at each temperature: 10 min
• Recovery time before measurements: 16 hrs
• Sealing IEC 529: IP67
MATERIALS
• Housing: PPS UL94V0
• Actuator: PPS UL94V0
• Sealing + spring: Silicone rubber
• Contact spring:
Silver - Stainless steel: + 3μAg
Gold - Stainless steel + 1μAu
• Fixed contacts:
Silver - SnCu + 2μNI + 3μAg
Gold - SnCu + 2μNI + 1μAu
• Terminals: SnCu + 2μNI + 3μSn100
Content missing
Related Products
-
APEM Single pole 1500 series toggle switches with metal lever, available with UL Approval (EN61058-1). Please be advised that the 1500 Series will be obsolete from the end ...
1500 Series Toggle Switch
APEM Single pole 1500 series toggle switches with metal lever, available with UL Approval (EN61058-1). Please be advised that the…
-
APEM MJTP Series 12mm square tact switches, through hole Featuring SPST momentary action with excellent tactile feedback (snap dome). Long operating life for high reliabil...
MJTP Series 12mm Through Hole Tact Switches
APEM MJTP Series 12mm square tact switches, through hole Featuring SPST momentary action with excellent tactile feedback (snap dome). Long operating…
-
APEM MJTP / PHAP33 Series 6mm Square tact switches, through hole Numerous single pole / single throw momentary configurations. Excellent tactile feedback (snap dome). Ultra...
MJTP / PHAP33 Series 6mm Through Hole Tact Switches
APEM MJTP / PHAP33 Series 6mm Square tact switches, through hole Numerous single pole / single throw momentary configurations. Excellent…
-
APEM 21000N Series low profile toggle switches available in single pole and double pole. Featuring threaded and smooth bushing. Wave solderable. Silver or gold-plated conta...
21000N Series Toggle Switch
APEM 21000N Series low profile toggle switches available in single pole and double pole. Featuring threaded and smooth bushing. Wave…








